ROOMS is a stereo, multi-function digital reverb capable of searing volume, gated walls of sound, and long, trailing reverberant ambiances with an intuitive array of controls designed with live mood-bending in mind.
ROOMS was designed to the highest standards of flexibility and audio fidelity. A studio-quality mixer section provides independent DRY and FX controls over six meticulously programmed reverb algorithms; ROOM, DIGIT, PEAK, GATE, WAVE, and GONG. Each different verb is capable of a universe of sounds, and ROOMS is here to help you explore them.
ROOMS' creative I/O switching and dual-mono dry signal lines allow for a wealth of possible mono and stereo configurations, making it easy to route signals for parallel processing or stereo amplifier setups.
FREQ: Controls the frequency parameter of the current mode.
DEPTH: Controls the depth parameter of the current mode.
TIME: Controls the reverb time in all modes.
DRY: Controls the volume of the dry signal, from -inf to 20x gain.
FX: Controls the volume of the reverb signal, from -inf to 20x gain.
ALT: Engages the ALT mode, switching between two sets of controls. When active, FREQ is controlled with the F knob, DEPTH with the D knob, and TIME with the T knob. Additionally, the ALT mode turns on expression control of either FREQ or TIME using the FT Switch on the side of the pedal. NOTE: Expression control ONLY works in ALT mode and when an expression pedal is plugged in.
Dimensions: 5.95" x 3.86" x 2.96" (including hardware).
Weight: 18 oz.
Power: 80 mA, 9V (runs on a standard 2.1 mm negative center 9V adapter).
Expression Pedal: Almost any expression pedal will work with ROOMS. When not plugged in, the controls work as normal. NOTE: Expression control ONLY controls the F or T knobs when ALT mode is engaged and when an expression pedal is plugged in.
1 - ROOM: Tone of Decay : Pre-Delay
A classic reverb that simulates many different rooms.
2 - DIGIT: Delay Time : Delay Feedback
A filter matrix verb capable of creating otherworldly resonances and fractured repeats.
3 - PEAK: Filter Frequency : Filter Resonance
A super intense bandpass filter combined with an ambient reverb.
4 - GATE: Decay Tone : Gate Response Time
A gated reverb. Short reverb times create a classic gate effect, long reverb times create a controllable freeze effect.
5 - WAVE: Modulation Frequency : Modulation Depth
Creates a pitch vibrato effect. Lowering TIME will blend out the reverb signal, allowing sweeps from chorus/vibrato to long modulated reverbs.
6 - GONG: Modulator Frequency : Blends from Aliasing (left) to Ring Modulation (right)
Ethereal, crushed reverb sounds guaranteed to make you star in the upcoming remake of DUNE and live out your sci-fi fantasies of space travel and galactic domination.